Industrial rubber sheet
|High wear-resistant rubber sheet||Black sponge rubber sheet||White sponge rubber sheet|
|Red striped rubber sheet||Insulated rubber sheet||Acid and alkali resistant rubber sheet|
|Heat-resistant rubber sheet||Iron Red Rubber Board||Oil-resistant rubber sheet|
Industrial rubber board USES:
Used for rubber gaskets, gaskets, cushioning parts and for laying floors and worktables.
According to the needs of the rubber board can be made into smooth or with patterns, cloth patterns and woven rubber board. Patterned rubber board has anti-skid effect, mainly used for paving. Rubber board with woven fabric, with high strength and not easy to stretch long characteristics, used for pressure and do not allow excessive extension of the occasion. And acid and alkali, oil resistant and heat resistant rubber board, respectively suitable for dilute acid and alkali solution, oil and steam, hot air and other media used.
Specifications of industrial rubber board:
Classification and code performance of rubber sheet
|Oil resistant performance||Category A: Oil-resistant, Category B: Medium oil-resistant, Category C: oil-resistant|
|The tensile strength（Mpa）|
Type 1 is more than 3, type 2 is more than 4, type 3 is more than 5, type 4 is more than 7, type 5 is more than 10,
秒速飞艇注册网址Type 6 (> 14, type 7 (> 17)
|Elongation at rupture（%）|
Grade 1 is greater than 100, grade 2 is greater than 150, grade 3 is greater than 200, grade 4 is greater than 250, grade 5 is greater than 300,
Grade 6 (> 350, grade 7 (> 400), grade 8 (> 500, grade 9 (> 600)
|Rubber hardness（IRHD）||H3：30，H4：40，H5：50，H6：60，H7：70， H8：80(Note: It can also be classified according to Shore A hardness)|
|Heat resistant performance（℃）||Hr1：100，Hr2：125，Hr3：150|
|Low temperature resistance（℃）||Tb1：-20，Tb2：-40|
|Nominal size||thickness（mm）：0.5 1 1.5 2 2.5 3 4 5 6 10 12 14 16 18 20 22 25 30 40 50M|
1。 Rubber sheets are also classified according to heat-resistant air aging properties (code Ar): Ar1 (70 72h) and Ar2 (100 72h)。 After aging, the reduction rates of tensile strength are less than 25% and less than 20%, and the true reduction rates of breaking elongation are less than 35% and less than 50%, respectively。 Class B and C rubber sheets meet Ar2 requirements。 If they fail to meet the requirements, the supplier and the Demander shall agree。
2. The nominal length of the rubber sheet, as well as the pattern and color of the surface, shall be agreed between the supplier and the demander.